How to Ensure the Maintenance of Your Hot Tub

How to Ensure the Maintenance of Your Hot Tub

Mickey Carter No Comment
Health Tips

The hot tub can definitely bring you plenty of health benefits, not to talk about the fact that it is a wonderful way to relax and spend a great time with the entire family. However, in order to feel safe at all times, you need to maintain the unit properly and regularly as well. Although most models circulate the water while operating, as shown at, a site that provides plenty of information on the functioning of hot tubs, you will still have to perform some cleaning that will guarantee no microorganisms will survive in the water. Therefore, here is how to ensure the maintenance of your hot tub.

How to Ensure the Maintenance of Your Hot Tub Picture

The first step is to test and apply the necessary chemicals to the water

This is the first thing you need to do in order to make sure the water in your hot tub is clean and safe at all times, and you will not deal with any sort of health problems. You can confidently use some test strips, which will definitely provide you the desired information. You need to check and adjust the chemical levels one or two times a week. These test strips can be found in most spa stores, and they are not expensive at all. Once you have tested the water you must add the chemicals. Add them one at a time. Wait around 2 hours before you add the next chemical. By doing so, the first chemical will have plenty of time to disperse and do its job. After you finish adding the chemicals, you must keep the cover off for about 20 minutes. Take into account the fact that you need to keep the water running while you actually add the chemicals. It is important to do so, in order to allow the jets to mix the chemicals in the water extremely well.

How to Ensure the Maintenance of Your Hot Tub Picture

It is important to sanitize the hot tub very well

You can do this by using chlorine or bromine. Bromine is actually less harsh and it also has a less potent smell. If you decide to use chlorine, then you need to put 2 tablespoons into the water once every two days. The chlorine level must stay between 1.5-3 PPM. On the other hand, if you are using bromine, then the level should stay between 3.0-5.0. It is highly recommended that you respect these important steps in order to not over sanitize your spa. It is also recommended to consider adding a mineral based purifier in order to highly reduce the amount of bromine or chlorine.


Clean the filter and the cover as well, regularly

This is a procedure that must be done once every two weeks. You must take the cartridge out of the filter and then run cold water over each plate, in order to clean all the dirt very well. You can also clean the filter in the dishwasher, but you need to make sure you turn off the built-in water heater. If the water is hotter than 140-degree, then the filter can be damaged. Keep in mind to replace the filter once it becomes damaged or it doesn’t work properly anymore. All in all, it is very important to know how to ensure the maintenance of your hot tub, so that you do not have any sort of health problems.

You must be logged in to post a comment